HP PROCURVE 6208M-SX Installation And Getting Started Manual Page 213

Hewlett-packard switch user manual.
Hide thumbs
Installation and Getting Started Guide
7.
Select the Save link at the bottom of the dialog. Select Yes when prompted to save the configuration change
to the startup-config file on the device's flash memory.
Changing the 802.3x Gigabit Negotiation Mode
The globally configured Gigabit negotiation mode for 802.3x flow control is the default mode for all Gigabit ports.
You can override the globally configured default and set individual ports to the following:
Negotiate-full-auto – The port first tries to perform a handshake with the other port to exchange capability
information. If the other port does not respond to the handshake attempt, the port uses the manually
configured configuration information (or the defaults if an administrator has not set the information). This is
the default.
Auto-Gigabit – The port tries to perform a handshake with the other port to exchange capability information.
Negotiation-off – The port does not try to perform a handshake. Instead, the port uses configuration
information manually configured by an administrator.
USING THE CLI
To change the mode for individual ports, enter commands such as the following:
HP9300(config)# int ethernet 4/1 to 4/4
HP9300(config-mif-4/1-4/4)# gig-default auto-gig
This command overrides the global setting and sets the negotiation mode to auto-Gigabit for ports 4/1 – 4/4.
Syntax: gig-default neg-full-auto | auto-gig | neg-off
USING THE WEB MANAGEMENT INTERFACE
To override the global 802.3x negotiation mode for an Gigabit individual port on a Chassis device:
1.
Log on to the device using a valid user name and password for read-write access. The System configuration
panel is displayed.
2.
Click on the plus sign next to Configure in the tree view to display the configuration options.
3.
Select the Port link to display the Port table.
4.
Click on the Modify button next to the row of information for the port you want to reconfigure.
5.
Select one of the following values from the Gig Port Default field's pulldown menu:
Default – The port uses the negotiation mode that was set at the global level.
Neg-off – The port does not try to perform a handshake. Instead, the port uses configuration information
manually configured by an administrator.
Auto-Gig – The port tries to perform a handshake with the other port to exchange capability information.
Neg-Full-Auto – The port first tries to perform a handshake with the other port to exchange capability
information. If the other port does not respond to the handshake attempt, the port uses the manually
configured configuration information (or the defaults if an administrator has not set the information).
6.
Click Apply to save the changes to the device's running-config file.
7.
Select the Save link at the bottom of the dialog. Select Yes when prompted to save the configuration change
to the startup-config file on the device's flash memory.
NOTE: You also can access the dialog for saving configuration changes by clicking on Command in the tree
view, then clicking on Save to Flash.
9 - 28

Advertising

   Related Manuals for HP PROCURVE 6208M-SX

Comments to this Manuals

Symbols: 0
Latest comments: