HP PROCURVE 6208M-SX Installation And Getting Started Manual Page 149

Hewlett-packard switch user manual.
Hide thumbs
Installation and Getting Started Guide
NOTE: Some features are supported only on specific products or require specific hardware configurations. See
the chapters describing those features or contact Hewlett-Packard or your reseller for information.
Determining the Flash Version a Device Is Running
To determine the flash image running on an HP device, do one of the following.
USING THE CLI
Enter the following command: show version
NOTE: You can enter this command from any CLI access level.
Here is an example of the information displayed by the command.
HP9300> show version
SW: Version 07.1.10T53 Hewlett-Packard Company
Compiled on Nov 17 2000 at 13:46:21 labeled as H2R07110
J4138A HP ProCurve Routing Switch 9308M
HW: ProCurve HP9308 Routing Switch, SYSIF version 21
==========================================================================
SL 1: 8 Port Gig Management Redundant Module, M2, ACTIVE
2048 KB BRAM, SMC version 1, ICBM version 21
512 KB PRAM(512K+0K) and 2048*8 CAM entries for DMA
512 KB PRAM(512K+0K) and shared CAM entries for DMA
512 KB PRAM(512K+0K) and 2048*8 CAM entries for DMA
512 KB PRAM(512K+0K) and shared CAM entries for DMA
==========================================================================
SL 3: 24 Port Copper Module
2048 KB BRAM, SMC version 2, ICBM version 21
256 KB PRAM(256K+0K) and 2048*8 CAM entries for DMA
256 KB PRAM(256K+0K) and shared CAM entries for DMA
256 KB PRAM(256K+0K) and shared CAM entries for DMA 10, version 0808
==========================================================================
SL 4: 24 Port Copper Module
2048 KB BRAM, SMC version 2, ICBM version 21
256 KB PRAM(256K+0K) and 2048*8 CAM entries for DMA 12, version 0808
256 KB PRAM(256K+0K) and shared CAM entries for DMA 13, version 0808
256 KB PRAM(256K+0K) and shared CAM entries for DMA 14, version 0808
==========================================================================
Active management module:
240 MHz Power PC processor 603 (version 7/1201) 63 MHz bus
512 KB boot flash memory
8192 KB code flash memory
256 KB SRAM
128 MB DRAM
The system uptime is 3 seconds
The system : started=warm start
USING THE WEB MANAGEMENT INTERFACE
1.
Log on to the device using a valid user name and password for read-only or read-write access. The System
configuration dialog is displayed.
2.
Click on the plus sign next to Monitor in the tree view to expand the list of monitoring options.
3.
Click on the Device link to display the Device Information panel.
7 - 2
reloaded=by "reload"
0, version 0209
1, version 0209
2, version 0209
3, version 0209
8, version 0808
9, version 0808

Advertising

   Related Manuals for HP PROCURVE 6208M-SX

Comments to this Manuals

Symbols: 0
Latest comments: