HP PROCURVE 6208M-SX Installation And Getting Started Manual: Reloading At A Specific Time; Reloading After A Specific Amount Of Time; Canceling A Scheduled Reload

Hewlett-packard switch user manual.
Hide thumbs
Installation and Getting Started Guide

Reloading at a Specific Time

To schedule a system reload for a specific time, use one of the following methods.
USING THE CLI
To schedule a system reload from the primary flash module for 6:00:00 AM, January 19, 1999, enter the following
command at the global CONFIG level of the CLI:
HP9300# reload at 06:00:00 01-19-99
Syntax: reload at <hh:mm:ss> <mm-dd-yy> [primary | secondary]
<hh:mm:ss> is the hours, minutes, and seconds.
<mm-dd-yy> is the month, day, and year.
primary | secondary specifies whether the reload is to occur from the primary code flash module or the
secondary code flash module. The default is primary.
USING THE WEB MANAGEMENT INTERFACE
You cannot schedule a system reload using the Web management interface.
Reloading after a Specific Amount of Time
To schedule a system reload to occur after a specific amount of time has passed on the system clock, use one of
the following methods.
USING THE CLI
To schedule a system reload from the secondary flash one day and 12 hours later, enter the following command at
the global CONFIG level of the CLI:
HP9300# reload after 01:12:00 secondary
Syntax: reload after <dd:hh:mm> [primary | secondary]
<dd:hh:mm> is the number of days, hours, and minutes.
primary | secondary specifies whether the reload is to occur from the primary code flash module or the
secondary code flash module.
USING THE WEB MANAGEMENT INTERFACE
You cannot schedule a system reload using the Web management interface.
Displaying the Amount of Time Remaining Before a Scheduled Reload
To display how much time is remaining before a scheduled system reload takes place, use one of the following
methods.
USING THE CLI
To display how much time is remaining before a scheduled system reload, enter the following command from any
level of the CLI:
HP9300# show reload
USING THE WEB MANAGEMENT INTERFACE
You cannot display information about a scheduled reload using the Web management interface.
Canceling a Scheduled Reload
To cancel a scheduled reload, use one of the following methods.
USING THE CLI
To cancel a scheduled system reload using the CLI, enter the following command at the global CONFIG level:
HP9300# reload cancel
6 - 10

Advertising

   Related Manuals for HP PROCURVE 6208M-SX

Comments to this Manuals

Symbols: 0
Latest comments: