HP PROCURVE 6208M-SX Installation And Getting Started Manual Page 127

Hewlett-packard switch user manual.
Hide thumbs
Installation and Getting Started Guide
Sync config data: TRUE
Sync boot image: FALSE
Running-config sync interval is 10 seconds
NOTE: The values shown in this example are the default values.
Syntax: sync-standby
NOTE: The sync-standby command has optional parameters. If you enter one of the parameters, the CLI
synchronizes software between the modules. To display the synchronization settings instead of synchronizing
software, enter the command without parameters.
This display shows the following information.
This Field...
Sync code image
Sync config data
Sync boot image
Running-config sync interval
Immediately Synchronizing Software
You can immediately synchronize software between the active and standby management modules. When you
synchronize software, the active module copies the software you specify to the standby module, replacing the
software on the standby module.
To synchronize software, use either of the following methods.
5 - 12
Table 5.1: CLI Display of Synchronization Settings
Displays...
Indicates whether the active module is configured to automatically
synchronize its flash code with the standby module.
one of the following:
FALSE – The code is not automatically synchronized.
TRUE – The code is automatically synchronized.
Indicates whether the active module is configured to automatically
synchronize its startup-config file with the standby module.
can be one of the following:
FALSE – The startup-config file is not automatically
synchronized.
TRUE – The startup-config file is automatically synchronized.
Indicates whether the active module is configured to automatically
synchronize its boot code with the standby module.
one of the following:
FALSE – The boot code is not automatically synchronized.
TRUE – The boot code is automatically synchronized.
Indicates whether the active module is configured to automatically
synchronize its running-config with the standby module. The value
can be one of the following:
FALSE – The running-config is not automatically synchronized.
TRUE – The running-config is automatically synchronized.
Th
e value can be
Th
e value
The
value can be

Advertising

   Related Manuals for HP PROCURVE 6208M-SX

Comments to this Manuals

Symbols: 0
Latest comments: