Replacing The Front Vga And/Or Front Lan Cable; Preliminary Steps; Removing The Defective Front Vga And/Or Front Lan Cable - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

Front panel and front VGA/LAN module
13.4 Replacing the front VGA and/or front LAN
cable
Upgrade and Repair Unit
(URU)
Tools: tool-less

13.4.1 Preliminary steps

"Locating the defective server" on page 43
Ê
"Disabling BitLocker functionality" on page 63
Ê
"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 47
Ê
"Getting access to the component" on page 47
Ê
"Removing the riser module 3" on page 60
Ê
13.4.2 Removing the defective front VGA and/or front
LAN cable
Ê Disconnect the front LAN cable as described in section
front LAN cable" on page
Ê Disconnect the front VGA cable as described in section
front VGA cable" on page
Ê Remove the front VGA/LAN module as described in section
front VGA/LAN module" on page
Ê Remove the front LAN and/or front VGA connector as described in section
"Removing the front connectors" on page
260
254.
255.
246.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Disconnecting the
"Disconnecting the
256.
"Removing the
RX200 S8