Replacing Cables; Replacing The System Cable (Accessible Drives / Top Hdd Cage); Preliminary Steps; Removing The Defective System Cable - Fujitsu PRIMERGY TX1310 M3 Upgrade And Maintenance Manual

Cables
16.3

Replacing cables

I
The following steps are only required in case of a defective cable.
16.3.1 Replacing the system cable (accessible drives /
top HDD cage)
Upgrade and Repair Unit
(URU)
Tool: tool-less

16.3.1.1 Preliminary steps

"Shutting down the server" on page 44
Ê
"Disconnecting the power cord" on page 45
Ê
"Getting access to the component" on page 46
Ê

16.3.1.2 Removing the defective system cable

"Removing the PSU" on page 76
Ê
"Removing an ODD" on page 160
Ê
Ê If applicable, remove HDD3 and HDD4, see section
HDD" on page
Ê Push the backup drive somewhat to the front to get more space, see section
"Removing a backup drive" on page
214
90.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Removing a 3.5-inch
169.
TX1310 M3