Software Configuration; Removing The Ufm; Preliminary Steps - Fujitsu PRIMERGY RX4770 M1 Upgrade And Maintenance Manual

14.3.2.4 Software configuration

In order to setup the ESXi configuration, the VMware ESXi Recovery Tools CD
is required. An ISO image of the CD is available from the Fujitsu service
partners portal at the following https address:
https://globalpartners.ts.fujitsu.com/com/service/ps/Servers/PRIMERGY/
Pages/default.aspx.
Ê Sign in and choose your PRIMERGY server.
Ê Select the Software & Tools Documentation category.
Ê Download the desired ESXi Recovery CD ISO image, listed under Tools.
Ê Unpack and burn the image to a CD.
Ê Ensure that no other USB storage device is connected to the server beside
the UFM.
Ê Insert the Recovery Tools CD into your CD / DVD drive and reboot the
server.
The server should now boot from the Recovery Tools CD.
Ê Follow the on-screen instructions to initiate the installation.
After the flash process is complete, you will be asked to reboot the system.
I
For the Japanese market, follow the instructions provided separately.

14.3.3 Removing the UFM

Field Replaceable Unit
(FRU)
Tools: Philips PH0 / (+) No. 0 screw driver
Phillips PH2 / (+) No. 2 screw driver

14.3.3.1 Preliminary steps

"Suspending BitLocker functionality" on page 59
Ê
"Disabling SVOM boot watchdog functionality" on page 60
Ê
"Locating the defective server" on page 43
Ê
RX4770 M1
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
281