Concluding Steps; Replacing An Fbu; Preliminary Steps; Removing The Defective Fbu - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Expansion cards and backup units
9.5.2.5

Concluding steps

"Reassembling" on page 60
Ê
"Connecting the power cord" on page 64
Ê
"Switching on the server" on page 66
Ê
9.5.3

Replacing an FBU

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
Dispose of used battery properly. Keep away from children.
●
Do not throw flash backup units into the trash can. Batteries must be
●
disposed of in accordance with local regulations concerning special
waste.
9.5.3.1

Preliminary steps

"Locating the defective server" on page 50
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
9.5.3.2

Removing the defective FBU

Ê Remove the FBU with the holder as described in section
with the holder" on page
Ê Disconnect the FBU cable from the FBU as described in section
"Disconnecting the FBU cable from the FBU" on page
Ê Remove the FBU from the holder as described in section
FBU from the holder" on page
220
218.
219.
Upgrade and Maintenance Manual
Hardware: 15 minutes
"Removing the FBU
219.
"Removing the
RX1330 M3