Customizing The Product Name - AudioCodes Mediant 2000 User Manual

User's Manual
Note:
To replace the background image via the ini file, take these 2
steps:
1. Place your background image file in the same folder in which the device's ini file
is located (i.e. the same location defined in the BootP/TFTP server).
2. Add/modify the ini file parameters in the table below according to the procedure
described ''Software Upgrade Wizard'' on page 255.
Note:
Table 25-3: Customizable Background ini File Parameters
Parameter
BkgImageFileName
25.4

Customizing the Product Name

The Product Name text string can be modified according to OEMs specific
requirements.
To replace the default product name with a text string via the Web interface,
modify the two ini file parameters in the table below according to the procedure
described' in 'Modifying ini File Parameters via the Web Interface's AdminPage''
on page 548.
To replace the default product name with a text string via the ini file, add/modify
the two ini file parameters in the table below according to the procedure
described in' 'Software Upgrade Wizard'' on page 255.
Table 25-4: Customizable Product Name ini File Parameters
Parameter
UseProductName
Version 5.0
If you encounter any problem during the loading of the files, or you want to
restore the default images, click the Restore Default Images button.
Loading the device's ini file via the Configuration File screen in the Web
interface does not load the background image file as well.
Description
The name of the file containing the new background.
Use a gif, jpg or jpeg image file.
The default is AudioCodes background file.
Note: The length of the name of the image file is limited to 47 characters.
Description
0 = Don't change the product name (default).
1 = Enable product name change.
25. Appendix - Customizing the Web Interface
547 June 2006