Table of Contents
Advertisement
SIP User's Manual
5.5
Provisioning SIP MLPP Parameters
This section describes how to configure the MLPP (Multi-Level Precedence and
Preemption) parameters using the EMS.
To configure the MLPP parameters:
1.
In the MG Tree, select the device.
2.
Select the Advanced tab; the 'SIP Advanced Configuration' frame appears.
3.
Select the MLPP tab; the following screen appears:
4.
Configure the MLPP parameters as required.
Note:
Version 5.8
If the following RTP DSCP parameters are set to "-1" (i.e., Not Configured,
Default), the DiffServ value is set with the PremiumServiceClassMediaDiffserv
global gateway parameter, or by using IP Profiles: MLPPRoutineRTPDSCP,
MLPPPriorityRTPDSCP, MLPPImmediateRTPDSCP, MLPPFlashRTPDSCP,
MLPPFlashOverRTPDSCP, MLPPFlashOverOverRTPDSCP,
MLPPNormalizedServiceDomain.
5. Element Management System (EMS)
283
October 2009
Advertisement
Table of Contents
Troubleshooting
