Console Port Login Configurations For Different Authentication Modes - H3C S5600 Series Operation Manual

Operation Manual – Login
H3C S5600 Series Ethernet Switches
Caution:
The change to console port configuration takes effect immediately, so the connection
may be disconnected when you log in through a console port and then configure this
console port. To configure a console port, you are recommended to log in to the switch
in other ways. To log in to a switch through its console port after you modify the console
port settings, you need to modify the corresponding settings of the terminal emulation
utility running on your PC accordingly in the dialog box shown in

2.3.2 Console Port Login Configurations for Different Authentication Modes

Table 2-3 Console port login configurations for different authentication modes
Authentication
mode
None
Password
Chapter 2 Logging In Through the Console Port
Console port login configuration
Perform Perform common
common configuration for
configuration console port login
Configure the
Configure the
password for local
password
authentication
Perform Perform common
common configuration for
configuration console port login
2-5
Figure 2-4.
Remarks
Optional
Refer to Table 2-2.
Required
Optional
Refer to Table 2-2.