H3C S5600 Series Operation Manual page 55

Operation Manual – Login
H3C S5600 Series Ethernet Switches
Configure to
authenticate users
using the local
password
Set the local password
Configur
e the
console
port
Configure the
command level
available to users
logging in to the user
interface
Make terminal services
available to the user
interface
Set the maximum
number of lines the
screen can contain
Set history command
buffer size
To do... Use the command...
authentication-mod
e password
set authentication
password { cipher |
simple } password
Set the
speed speed-value
baud rate
Set the
parity { even | none |
check
odd }
mode
Set the stop
stopbits { 1 | 1.5 | 2 }
bits
Set the data
databits { 7 | 8 }
bits
user privilege level
level
shell
screen-length
screen-length
history-command
max-size value
Chapter 2 Logging In Through the Console Port
Required
By default, users logging in to a
switch through the console port
are not authenticated; while those
logging in through Modems or
Telnet are authenticated.
Required
Optional
The default baud rate of an AUX
port (also the console port) is
9,600 bps.
Optional
By default, the check mode of a
console port is set to none, that
is, no check bit.
Optional
The default stop bits of a console
port is 1.
Optional
The default data bits of a console
port is 8.
Optional
By default, commands of level 3
are available to users logging in
to the AUX user interface.
Optional
By default, terminal services are
available in all user interfaces.
Optional
By default, the screen can contain
up to 24 lines.
You can use the screen-length 0
command to disable the function
to display information in pages.
Optional
The default history command
buffer size is 10. That is, a history
command buffer can store up to
10 commands by default.
2-10
Remarks