H3C S5600 Series Operation Manual page 95

Operation Manual – Login
H3C S5600 Series Ethernet Switches
You need to perform the following two operations to control network management users
by source IP addresses.
Defining an ACL
Applying the ACL to control users accessing the switch through SNMP
8.3.1 Prerequisites
The controlling policy against network management users is determined, including the
source IP addresses to be controlled and the controlling actions (permitting or denying).
8.3.2 Controlling Network Management Users by Source IP Addresses
Controlling network management users by source IP addresses is achieved by
applying basic ACLs, which are numbered from 2000 to 2999.
Follow these steps to control network management users by source IP addresses:
To do...
Enter system view
Create a basic ACL
or enter basic ACL
view
Define rules for the
ACL
Quit to system view
Use the command...
system-view
acl number acl-number
[ match-order { auto | config } ]
rule [ rule-id ] { deny | permit }
[ rule-string ]
quit
8-5
Chapter 8 User Control
Remarks
—
As for the acl
number command,
the config keyword
is specified by
default.
Required
—