Error Prompts - H3C S5600 Series Operation Manual

Operation Manual – CLI
H3C S5600 Series Ethernet Switches
Display the latest
executed history
commands
Recall the previous
history command
Recall the next history
command
Note:
The Windows 9x HyperTerminal explains the up and down arrow keys in a different
way, and therefore the two keys are invalid when you access history commands in
such an environment. However, you can use <Ctrl+ P> and <Ctrl+ N> instead to
achieve the same purpose.
When you enter the same command multiple times consecutively, only one history
command entry is created by the command line interface.

1.4.4 Error Prompts

If a command passes the syntax check, it will be successfully executed; otherwise, an
error message will be displayed.
Table 1-3 Common error messages
Unrecognized command
Incomplete command
Too many parameters
Ambiguous command
Wrong parameter
found at '^' position
Purpose
Execute the display
history-command
command
Press the up arrow key or
<Ctrl+P>
Press the down arrow key
or <Ctrl+N>
Error message
Operation
Table 1-3 lists the common error messages.
The command does not exist.
The keyword does not exist.
The parameter type is wrong.
The parameter value is out of range.
The command entered is incomplete.
The parameters entered are too many.
The parameters entered are ambiguous.
A parameter entered is wrong.
An error is found at the '^' position.
1-16
Chapter 1 CLI Configuration
Remarks
This command displays
the command history.
This operation recalls the
previous history
command (if available).
This operation recalls the
next history command (if
available).
Remarks