H3C S5600 Series Operation Manual page 130

Operation Manual – VLAN
H3C S5600 Series Ethernet Switches
VLAN ID: 200
VLAN Type: Protocol-based VLAN
Protocol Index
# Configure GigabitEthernet 1/0/10 as a hybrid port, which removes the VLAN tag of
the packets of VLAN 100 and VLAN 200 before forwarding the packets.
[Switch-vlan100] quit
[Switch] interface GigabitEthernet 1/0/10
[Switch-GigabitEthernet1/0/10] port link-type hybrid
[Switch-GigabitEthernet1/0/10] port hybrid vlan 100 200 untagged
# Associate GigabitEthernet 1/0/10 with protocol template 0 and 1 of VLAN 100, and
protocol template 0 of VLAN 200.
[Switch-GigabitEthernet1/0/10] port hybrid protocol-vlan vlan 100 0 to 1
[Switch-GigabitEthernet1/0/10] port hybrid protocol-vlan vlan 200 0
# Display the associations between GigabitEthernet 1/0/10 and the VLAN protocol
templates to verify your configuration.
[Switch-GigabitEthernet1/0/10]
GigabitEthernet 1/0/10
Interface: GigabitEthernet1/0/10
VLAN ID
The above output information indicates that GigabitEthernet 1/0/10 has already been
associated with the corresponding protocol templates of VLAN 100 and VLAN 200.
Thus, packets from the IP and AppleTalk workstations can be automatically assigned to
VLAN 100 and VLAN 200 respectively for transmission by matching the corresponding
protocol templates, so as to realize the normal communication between workstations
and servers.
0
1
0
Protocol-Index
100 0
100 1
200 0
ip
ethernetii etype 0x0806
Protocol Type
at
display
Protocol-Type
ip
ethernetii etype 0x0806
at
2-12
Chapter 2 VLAN Configuration
protocol-vlan interface