Console Port Login Configurations For Different Authentication Modes - H3C S5120-SI Series Configuration Manual

AUX user
interface
configuration
Terminal
configuration
Changing of Console port configuration terminates the connection to the Console port. To establish the
connection again, you need to modify the configuration of the termination emulation utility running on
your PC accordingly. Refer to

Console Port Login Configurations for Different Authentication Modes

Table 2-3 lists Console port login configurations for different authentication modes.
Table 2-3 Console port login configurations for different authentication modes
Authentication
mode
None
Password
Configuration
Configure the command
level available to
users logging in to the
AUX user interface
Define a shortcut key for
aborting tasks
Define a shortcut key for
starting terminal sessions
Make terminal services
available
Set the maximum number
of lines the screen can
contain
Set history command
buffer size
Set the timeout time of a
user interface
Setting Up the Connection to the Console Port
Console port login configuration
Perform
common
configuration
Configure the
password
Perform
common
configuration
Optional
the
By default, commands of level 3 are available to the
users logging in to the AUX user interface.
Optional
The default shortcut key combination for aborting
tasks is < Ctrl + C >.
Optional
By default, pressing Enter key starts the terminal
session.
Optional
By default, terminal services are available in all user
interfaces
Optional
By default, the screen can contain up to 24 lines.
Optional
By default, the history command buffer can contain
up to 10 commands.
Optional
The default timeout time is 10 minutes.
Optional
Perform common
configuration for
Refer to
Console port login
details.
Configure the
password for local Required
authentication
Optional
Perform common
configuration for
Refer to
Console port login
details.
2-4
Description
for details.
Description
Common Configuration
Common Configuration
for
for