Console Port Login Configurations For Different Authentication Modes; Console Port Login Configuration With Authentication Mode Being None; Configuration Procedure - H3C S5600 SERIES Operation Manual

Console Port Login Configurations for Different Authentication Modes

Table 2-3 Console port login configurations for different authentication modes
Authentication
mode
None
Password
Scheme
Changes made to the authentication mode for console port login takes effect after you quit the
command-line interface and then log in again.
Console Port Login Configuration with Authentication Mode Being
None

Configuration Procedure

Follow these steps to configure console port login with the authentication mode being none:
Console port login configuration
Perform Perform common
common configuration for console
configuration port login
Configure the Configure the password for
password local authentication
Perform Perform common
common configuration for console
configuration port login
Specify to AAA configuration
perform local specifies whether to
authentication or perform local
remote RADIUS authentication or RADIUS
authentication authentication
Configure user Configure user names and
name and passwords for
password local/RADIUS users
Manage AUX Set service type for AUX
users users
Perform Perform common
common configuration for console
configuration port login
2-5
Remarks
Optional
Refer to Table 2-2.
Required
Optional
Refer to Table 2-2.
Optional
Local authentication is
performed by default.
Refer to the AAA part for
more.
Required
The user name and
password of a local user
are configured on the
switch.
The user name and
password of a RADIUS
user are configured on the
RADIUS server. Refer to
user manual of RADIUS
server for more.
Required
Optional
Refer to Table 2-2.