Ethernet Port Configuration; Chapter 1 Port Basic Configuration; Combo Port Configuration - H3C S5100-SI Series Operation Manual

Operation Manual – Port Basic Configuration
H3C S5100-SI/EI Series Ethernet Switches

Chapter 1 Port Basic Configuration

1.1 Ethernet Port Configuration

1.1.1 Combo Port Configuration

A Combo port can operate as either an optical port or an electrical port. Inside the
device there is only one forwarding interface. For a Combo port, the electrical port and
the corresponding optical port are TX-SFP multiplexed. You can specify a Combo port
to operate as an electrical port or an optical port. That is, a Combo port cannot operate
as both an electrical port and an optical port simultaneously. When one is enabled, the
other is automatically disabled.
Table 1-1 Mapping relations between the ports forming the Combo port
S5100-16P-SI
S5100-16P-EI
S5100-16P-PWR-EI
S5100-24P-SI
S5100-24P-EI
S5100-26C-EI
S5100-26C-PWR-EI
S5100-48P-SI
S5100-48P-EI
S5100-50C-EI
S5100-50C-PWR-EI
Follow these steps to configure the state of a double Combo port:
Enter system view
Enter Ethernet interface view
Model 1000Base-X SFP port
GigabitEthernet1/0/17
GigabitEthernet1/0/18
GigabitEthernet1/0/19
GigabitEthernet1/0/20
GigabitEthernet1/0/25
GigabitEthernet1/0/26
GigabitEthernet1/0/27
GigabitEthernet1/0/28
GigabitEthernet1/0/49
GigabitEthernet1/0/50
GigabitEthernet1/0/51
GigabitEthernet1/0/52
To do...
Chapter 1 Port Basic Configuration
Use the command...
system-view
interface interface-type
interface-number
1-1
10/100/1000Base-T
autosensing Ethernet
port
GigabitEthernet1/0/14
GigabitEthernet1/0/16
GigabitEthernet1/0/13
GigabitEthernet1/0/15
GigabitEthernet1/0/22
GigabitEthernet1/0/24
GigabitEthernet1/0/21
GigabitEthernet1/0/23
GigabitEthernet1/0/46
GigabitEthernet1/0/48
GigabitEthernet1/0/45
GigabitEthernet1/0/47
Remarks
—
—