Port Basic Configuration; Ethernet Port Configuration; Initially Configuring A Port - H3C S5600 Series Operation Manual

1

Port Basic Configuration

When performing basic port configuration, go to these sections for information you are interested in:

Ethernet Port Configuration

Ethernet Port Configuration Example
Troubleshooting Ethernet Port Configuration
The configuration of loopback port auto-shutdown and loopback detection on Ethernet ports in bulk
is added. For the detailed configuration, refer to
Port.
The configuration of the support for the kbps keyword in storm suppression thresholds is added.
For the detailed configuration, refer to
Ethernet Port Configuration

Initially Configuring a Port

Follow these steps to initially configure a port:
To do...
Enter system view
Enter Ethernet port view
Enable the Ethernet port
Set the description string for
the Ethernet port
Set the duplex mode of the
Ethernet port
Set the speed of the
Ethernet port
Configuring Storm Control on a Port.
Use the command...
system-view
interface interface-type
interface-number
undo shutdown
description text
duplex { auto | full | half }
speed { 10 | 100 | 1000 | auto }
1-1
Configuring Loopback Detection for an Ethernet
—
—
Optional
By default, the port is enabled.
Use the shutdown command to disable
the port.
Optional
By default, the description string of an
Ethernet port is null.
Optional
By default, the duplex mode of the port is
auto (auto-negotiation).
Optional
By default, the speed of the port is auto
(auto-negotiation).
Remarks