Event Config - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.19.2 Event Config

Use the Event Config sub-menu to configure which events trigger the 802.3ah OAM monitoring and management function.
To configure link events:
1. Click Configuration >
2. Choose a port number from the port drop-down box next to the
3. Configure the parameters.
4. Click Save.
Parameter description
Event Name:

This column shows the name of the link event that will be monitored by the switch.
Error Frame Event:

The Error Frame Event counts the number of error frames detected during the time defined by the
ates an event if the error frame count is equal to or greater than the threshold
frames that had transmission errors as detected at the Media Access Control sub-layer.
Event Seconds Summary:

The Error Frame Seconds Summary Event counts the number of error frame seconds that occurred during the time defined by the
dow (100 msec) field and generates an event if the error frame count is equal to or greater than the threshold
that time window. An error frame second is a one second interval wherein at least one frame error was detected. Error frames are
frames that had transmission errors as detected at the Media Access Control sub layer.
Symbol Period Error Event:

The Error Symbol Period Event counts the number of symbol errors that occurred during the time defined by the
field and generates an event if the error symbol count is equal to or greater than the threshold
The time period is specified in the
underlying physical layer.
Frame Period Error Event:

MGS3600-24F/XGS3600-26F/XGS3600-28F
802.3ah OAM > Event Config.
Window (100 msec)
Auto-refresh check box.
(Period
field as the number of symbols that can be received in this time period on the
7-126
Window (100 msec)
Threshold) for that time window. Error frames are
(Period
Window (100 msec)
(Period Threshold) for that time window.
field and gener-
Win-
Threshold) for
U ' G
SER S UIDE