ZyXEL Communications MGS3600-24F User Manual page 310

F M
RONT ATTER
State:

Shows the current state of the port. It can take one of four values:
Disabled: No user modules are currently using the Port Security service.

Ready: The Port Security service is in use by at least one user module, and is awaiting frames from unknown MAC addresses to arrive.

Limit Reached: The Port Security service is enabled by at least the Limit Control user module, and that module has indicated that the

limit is reached and no more MAC addresses should be taken in.
Shutdown: The Port Security service is enabled by at least the Limit Control user module, and that module has indicated that the limit is

exceeded. No MAC addresses can be learned on the port until it is administratively re-opened on the Limit Control configuration Web-
page.
MAC Count (Current, Limit):

These two columns indicate the number of currently learned MAC addresses (forwarding as well as blocked) and the maximum number of
MAC addresses that can be learned on the port, respectively.
If no user modules are enabled on the port, the
If the Limit Control user module is not enabled on the port, the
Indicates the number of currently learned MAC addresses (forwarding as well as blocked) on the port. If no user modules are enabled on
the port, a dash (-) will be shown.
MGS3600-24F/XGS3600-26F/XGS3600-28F
Current column will show a dash (-).
Limit column will show a dash (-).
8-37 U ' G
SER S UIDE