Radius Accounting Server Configuration - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER
TACACS+ Authorization and Accounting Configuration
Authorization

Use this drop-down box to
Fallback to Local Authorization

Use this drop-down box to configure whether the switch uses local authentication if TACACS+ authorization is not available.
Accounting

Use this drop-down box to
RADIUS Authentication Server Configuration
#:

The RADIUS Authentication Server number for which the configuration below applies.
Enabled:

Enable the RADIUS Authentication Server by checking this box.
IP Address/Host name:

The IP address or host name of the RADIUS Authentication Server.
Port:

The UDP port to use on the RADIUS Authentication Server. If the port is set to 0 (zero), the default port (1812) is used on the RADIUS
Authentication Server.
Secret:

The secret - up to 29 characters long - shared between the RADIUS Authentication Server and the switch stack.

RADIUS Accounting Server Configuration

The table has one row for each RADIUS Accounting Server and a number of columns, which are:
#:

The RADIUS Accounting Server number for which the configuration below applies.
Enabled:

MGS3600-24F/XGS3600-26F/XGS3600-28F
Enable or Disable TACACS+ authorization on this switch.
Enable or Disable TACACS+ accounting on this switch
8-26 U ' G
SER S UIDE