F
M
RONT
ATTER
Interconnected Node:
Use this check box to configure this ring instance as interconnected or not interconnected.
Virtual Channel:
Check this check box to configure a virtual channel for this sub-ring.
Major Ring ID:
Use this field to configure the major ring group ID for the interconnected sub-ring. The major ring group ID is used to send topology changes
on the major ring. For major rings, this value is the same as the protection group ID for this ring.
Alarm:
The shows the MEP alarm data. There is an active alarm on the MEP.
MGS3600-24F/XGS3600-26F/XGS3600-28F
7-140
U
'
G
SER
S
UIDE