F
M
RONT
ATTER
2.2.2 Attaching the Mounting Brackets to the Switch
1.
Position a mounting bracket on one side of the switch, lining up the four screw holes on the bracket with the screw holes on the side of the
switch.
Figure 2-2. MGS3600-24F/XGS3600-26F/XGS3600-28F Attaching the Mounting Brackets
2.
Using a #2 Phillips screwdriver, install the M3 flat head screws through the mounting bracket holes into the switch.
3.
Repeat steps 1 and 2 to install the second mounting bracket on the other side of the switch.
4.
You may now mount the switch on a rack. Proceed to the next section.
MGS3600-24F/XGS3600-26F/XGS3600-28F
2-5
U
'
G
SER
S
UIDE