AAM1212 User's Guide
Figure 31 Config Save Menu
16 Click Save.
Figure 32 Config Save Screen
You can now use the device (with the other settings set to the defaults) to provide service to
ADSL subscribers. See the rest of this chapter for information on other default settings.
5.3 Default Settings
This table lists major default settings.
Table 5 Default Settings
VLAN Default Settings
One VLAN is created (this is also the management VLAN).
VID:
Registration
Tagging:
STP Default Settings
Enable/Disable State:
Operational Mode:
(ADSL) Port Profile Default Settings
Name:
Profile Status:
Latency Mode:
Max Rate
Min Rate
Interleave Delay
Max SNR
Min SNR
60
1
Fixed for the Ethernet and ADSL ports
Untagged for all ports
Disabled
auto
DEFVAL
Active
Interleave
Upstream ADSL Settings:
512 Kbps
32 Kbps
4 ms
31 db
0 db
Downstream ADSL Settings:
2048 Kbps
32 Kbps
4 ms
31 db
0 db
Chapter 5 Initial Configuration