ZyXEL Communications MGS3600-24F User Manual page 258

F M
RONT ATTER
Use this drop-down box to configure this port to initiate the discovery process
Passive mode). After the discovery process active ports can send any OAMPDU while connected to a remote OAM peer. Active ports don't
respond to OAM remote loopback commands and variable requests from a passive peer. Passive ports react to the initiation of the discov-
ery process to prevent passive to passive links. Passive ports don't send Variable Request or Loopback Control OAMPDUs.
Loopback support:

Check this check box to enable this port to execute the remote loopback command that helps fault localization and link performance testing.
Link Monitor support:

Use this check box to configure whether this port supports event notification that permits the inclusion of diagnostic information.
MIB Retrieval Support:

Use this check box to configure whether this port supports polling of various Link OAM based MIB variables.
Loopback Operation:

Check this check box to start a loopback operation on this port.
MGS3600-24F/XGS3600-26F/XGS3600-28F
(Active mode) or not to initiate the discovery process (default
7-125 U ' G
SER S UIDE