Access - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

6.7.6 Access

Use the Access sub-menu to configure SNMPv3 access table. The maximum number of groups is 14 and the entry indices are group name, secu-
rity model and security level.
To add a new SNMP Access entry:
1. Click System > SNMP
2. Click Add new Access.
3. Specify the SNMP Access parameters.
4. Click Save.
Parameter description
Delete:

Use this check box to mark an entry for deletion. The entry is deleted during the next save.
Group Name:

Use this field to configure a group name. Group names can be up to 32 characters, each of which with ASCII codes from 33 to 126.
Security Model:

Use this drop-down box to configure the security model of a new entry. Possible security models are:
any: Any security model accepted.

v1: SNMPv1.

v2c: SNMPv2c.

usm: SNMPv3 User-based Security Model (USM).

Security Level:

Use this drop-down box to configure the security level of a new entry. Possible security levels are:
NoAuth, NoPriv:

Auth, NoPriv: Authentication and no privacy.

Auth, Priv: Authentication and privacy.

MGS3600-24F/XGS3600-26F/XGS3600-28F
> Access.
No authentication and no privacy.
6-29 U ' G
SER S UIDE