ZyXEL Communications MGS3600-24F User Manual page 308

F M
RONT ATTER
Click the Reopen button.

Trap & Shutdown:

taken.
State:

This column shows the current state of the port as seen from the Limit Control's point of view. The state takes one of four values:
Disabled: Limit Control is either globally disabled or disabled on the port.

Ready: The limit is not yet reached. This can be shown for all actions.

Limit Reached: Indicates that the limit is reached on this port. This state can only be shown if Action is set to None or Trap.

Shutdown: Indicates that the port is shut down by the Limit Control module. This state can only be shown if Action is set to Shutdown or

Trap & Shutdown.
Re-open Button:

If a port is shutdown by this module, you may reopen it by clicking this button, which will only be enabled if this is the case. For other meth-
ods, refer to Shutdown in the Action section.
Note:
Clicking the reopen button causes the page to be refreshed, so non-committed changes will be lost
MGS3600-24F/XGS3600-26F/XGS3600-28F
If Limit + 1 MAC addresses is seen on the port, both the Trap and the Shutdown actions described above will be
8-35 U ' G
SER S UIDE