ZyXEL Communications MGS3600-24F User Manual page 270

F M
RONT ATTER
7.21 EPS
Use the EPS sub-menu to configure Ethernet Linear Protection Switching instances.
To configure Ethernet Linear Protection Switching:
1. Click Configuration > EPS.
2. Click Add new EPS.
3. Configure the parameters.
4. Click Save.
Parameter description
EPS ID:

Use this field to configure the Ethernet Protection Switching identity.
Domain:

Use this drop-down box to configure the CFM domain. Possible values are:.
Port: This is an EPS instance in the Port Domain. The working/protected flow is a Port.

Esp: This is reserved for future use and needs a firmware upgrade to support it.

Evc: This is an EPS in the EVC Domain. The working/protected flow is an EVC.

Mpls: This is reserved for future use and needs a firmware upgrade to support it.

Architecture:

Use this field to configure a
W flow:

Use this field to configure the working flow.
P flow:

Use this field to configure the protecting flow.
W SF MEP:

Use this field to configure the working Signal Fail reporting MEP.
MGS3600-24F/XGS3600-26F/XGS3600-28F
1+1 or 1:1 EPS architecture.
7-137 U ' G
SER S UIDE