Ports - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.11.2 Ports

Use the Ports sub-menu to configure ingress and egress VLAN tagging port behavior.
To configure VLAN ports:
1. Click Configuration >
2. Configure the parameters.
3. Click Save.
Parameter description
Ethertype for Custom S-ports:

Use this field to configure the ethertype used for custom service ports. This is a global setting for all the Custom S-ports. Custom ethertype
enables the user to change the Ethertype value on a port to any value to support network devices that do not use the standard 0x8100
Ethertype field value on 802.1Q-tagged or 802.1p-tagged frames.
Port:

This shows the logical port number of this row.
Port Type:

Use this drop-down box to configure the port as Unaware,
port). If the port type is unaware, all frames are classified with the
Ingress Filtering:

Use this check box to enable or disable (default) ingress filtering on a port. There are two ingress filtering rules which can be applied to a
port. Rule 1 forwards only frames with VIDs matching this VID of the port. Rule 2 drops untagged frames. If ingress filtering is enabled and
the ingress port is not a member of the classified VLAN of the frame, the frame is discarded.
Frame Type:

Use this drop-down box to configure what kind of frames this port accepts. Choose
accept only tagged frames or choose
Egress Rule:

MGS3600-24F/XGS3600-26F/XGS3600-28F
VLAN > Ports.
Untagged to accept only untagged frames.
C-port (Customer port), S-port
PVID and tags are not removed.
All (default) to accept all frames, choose
7-80
(Service port), S-custom-port (Custom Service
Tagged to
U ' G
SER S UIDE