F
M
RONT
ATTER
Initial Configuration
The MGS3600-24F/XGS3600-26F/XGS3600-28F allows only one administrator to configure the system at any given time. If more than one user
logs in as admin, only the first user to log in is allowed to configure the system; other users can only monitor the system. Non-admin users can only
ever monitor the system. A maximum of three users can log in simultaneously.
The default management interface configuration of the MGS3600-24F/XGS3600-26F/XGS3600-28F is as follows.
Table 6-1: Default Management Interface Configuration
DHCP Client
Static IP Address
Static Subnet Mask
Static Default Gateway
Username
Password
Note:
The default admin password is blank, so simply press enter at the password prompt.
The MGS3600-24F/XGS3600-26F/XGS3600-28F Web interface can be accessed over IPv4 or IPv6.
This switch supports a neutral web browser interface. We recommend a minimum of Microsoft IE 6.0, Netscape 7.1 or Firefox 1.00 and a
screen resolution of 1024x768 for optimal results.
The MGS3600-24F/XGS3600-26F/XGS3600-28F gets its IP configuration via DHCP by default. If there is no DHCP server, the switch uses
the static IP configuration.
MGS3600-24F/XGS3600-26F/XGS3600-28F
Enabled
192.168.1.1
255.255.255.0
192.168.1.254
admin
<Blank password>
6-3
U
'
G
SER
S
UIDE