Configuration - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.10.1 Configuration

Use the Configuration sub-menu to set a time-out for dynamic entries in the CAM, define how each port can influence the CAM and set new static
entries.
To configure MAC Address Table
1. Click Configuration >
2. Click Add new static
3. Configure the parameters.
4. Click Save.
Parameter description
Aging Configuration
Disable Automatic Aging:

Check this check box to configure the CAM never to remove an entry.
Aging Time:

Use this field to configure a time-out between
MAC Table Learning
Use the MAC Table Learning
module is in control of how frames arriving on this port update the CAM. An example of such a module is the MAC-Based Authentication under
802.1X. Each port update the CAM (or learn new entries) based upon the following options.
Port Members

These fields show the ports to be configured.
Auto:

Check this radio button to ensure learning is done as soon as a frame with unknown source MAC address is received.
MGS3600-24F/XGS3600-26F/XGS3600-28F
Filtering Data Base > Configuration.
entry.
10 and
parameters to configure how the CAM is updated. If the learning mode for a given port is greyed out, another
1000000 (default 300) seconds for CAM entries.
7-76 U ' G
SER S UIDE