ZyXEL Communications MGS3600-24F User Manual page 184

F M
RONT ATTER
QRI:

Use this field to configure the Query Response Interval to a value from 0 to 31744 (default 100) in tenths of a second. The Query Response
Interval is the Max Response Time (IGMP) or Maximum Response Delay (MLD) used to calculate the value of the Max Resp Code (IGMP)
or Maximum Response Code (MLD) field in periodic General Queries.
LLQI:

Last Member Query Interval (LMQI) and Last Listener Query Interval (LLQI) are configuration items for IGMP (IPv4) and MLD (IPv6)
respectively. They are equivalent in purpose. Use this field to configure LMQI or LLQI to a value from 0 to 31744 (default 10) in tenths of a
second. LMQI is the Max Response Time (IGMP) or Maximum Response Delay (MLD) used to calculate the value of the Max Resp Code
(IGMP) or Maximum Response Code (MLD) field in Group-Specific Queries (IGMP) or Multicast Address Specific Queries (MLD) and
Group-and-Source-Specific Queries (IGMP) or Multicast Address and Source Specific Queries.
URI:

Use this field to configure the Unsolicited Report Interval to a value from 0 to 31744 (default 1) in seconds. The Unsolicited Report Interval
is the time between repetitions of a host's initial report of membership in a group.
MGS3600-24F/XGS3600-26F/XGS3600-28F 7-51 U ' G
SER S UIDE