Ipv6 - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

6.5.2 IPv6

Use the IPv6 sub-menu to configure the host IPv6 address for the management interface.
To set the IPv6 configuration:
1. Click System > IP > IPv6.
2. Specify the IPv6 settings.
3. Click Save.
Parameter description
The Configured column is used to view or change the IPv6 configuration. The
Auto Configuration:

Use this check box to enable or disable IPv6 auto-configuration. If auto-configuration fails, the configured IPv6 address is zero. The router
may delay responding to a router solicitation for a few seconds, so the total time needed to complete auto-configuration can be significantly
longer.
Address:

Use this field to set the IPv6 address of this switch.
An IPv6 address is a 128-bit value represented by eight colon-separated hexadecimal strings of four digits. An example address is
'fe80::215:c5ff:fe03:4dc7'. The double colon symbol '::' is a shorthand way of representing multiple strings of contiguous zeros, but it can
only appear once.
Prefix:

Use this field to set the IPv6 prefix of this switch. The allowed range is 1 to 128.
Gateway:

Use this field to set the IPv6 gateway address of this switch.
MGS3600-24F/XGS3600-26F/XGS3600-28F
Current column is used to show the active IPv6 configuration.
6-19 U ' G
SER S UIDE