F
M
RONT
ATTER
3.1.4 Power Connectors
Use the following procedures to connect the switch to a power source after you have installed it.
WARNING:
Make sure you are using the correct power source as shown on the panel and that no objects obstruct the airflow of the fans. Use only
power wires of the required diameter for connecting the switch to a power supply.
AC Power Connection
1.
Connect the female end of the power cord to the power socket of your switch.
2.
Connect the other end of the cord to a power outlet.
MGS3600-24F/XGS3600-26F/XGS3600-28F
3-10
U
'
G
SER
S
UIDE