ZyXEL Communications MGS3600-24F User Manual page 92

F M
RONT ATTER
Table 5-2: System Information and Time Configuration
L
ABEL
System Location
Clock Source
Local Time
Time Zone Offset
Daylight Savings
Time Set Offset
Daylight Savings Type
From
To
MGS3600-24F/XGS3600-26F/XGS3600-28F
This shows the location of the device (e.g. telephone closet, 3rd floor). The maximum
length of text is 255 characters and each character can have an ASCII code of 32 to 126.
Select Use Local Settings or Use NTP Server to set the time from the device's onboard
clock or from a remote NTP server.
Use this field to set the device's onboard clock.
Use this field to configure the time zone offset relative to UTC/GMT. This is also used
when NTP synchronizes time.
Use this check box to enable or disable daylight saving mode. In daylight saving mode,
the time will be offset by the Time Set Offset value between the From and To times.
Use this field to configure the daylight saving time offset. If this is non-zero, the From and
To fields must be configured to enable daylight saving mode.
Select By dates or Recurring to configure how the From and To fields are used to define
daylight saving time. Select By dates to start and finish daylight saving on fixed dates.
Select Recurring to start and finish daylight saving on a day of the month.
Use this field to configure the start of daylight saving time. The top From field is active if
the By dates radio button is selected in Daylight Savings Type otherwise the bottom From
field is active.
Use this field to configure the end of daylight saving time. The top To field is active if the
By dates radio button is selected in Daylight Savings Type otherwise the bottom To field is
active.
5-9
D
ESCRIPTION
U ' G
SER S UIDE