F
M
RONT
ATTER
8.3 ARP Inspection
Use the
ARP Inspection
sub-menu to configure the switch to ensure the IP address and MAC address in ARP packets is the same as those
gleaned by snooping on DHCP packets.
8.3.1 Configuration
Use the
Configuration
sub-menu to enable ARP Inspection on a port-by-port basis.
To configure ARP Inspection:
1. Click
Security
>
ARP Inspection
2. Configure the parameters.
3. Click Save.
Parameter description
ARP Inspection Configuration
Mode:
Use this drop-down box to globally enable or disable ARP Inspection.
Port Mode Configuration
Port:
This field shows the port number for this row.
Mode:
Use this drop-down box to enable or disable ARP Inspection on this port.
MGS3600-24F/XGS3600-26F/XGS3600-28F
> Configuration.
8-6
U
'
G
SER
S
UIDE