Qos Ingress Port Tag Classification Page - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER
This shows the logical port number of this row.
QoS class:

Use this drop-down box to configure the default QoS class for frames not classified in any other way. There is a one to one mapping
between QoS class, queue and priority. A QoS class of zero has the lowest priority.
DP level:

Use this drop-down box to configure the default Drop Precedence Level for frames not classified in any other way.
PCP:

Use this drop-down box to configure the default Priority Code Point for untagged frames.
DEI:

Use this drop-down box to configure the default Drop Eligibility Indicator for untagged frames.
Tag Class:

This shows the following classification modes for tagged frames on this port.
Disabled: Use default QoS class and DP level for tagged frames.

Enabled: Use mapped versions of PCP and DEI for tagged frames.

Port Tag Classification
Click the mode to configure the mode and/or mapping on the
DSCP Based:

Use this check box to enable DSCP-based QoS ingress port classification.

QoS Ingress Port Tag Classification page

Tag Classification:

Use this drop-down box to
PCP:

This field shows the default Priority Code Point for untagged frames.
DEI:

This field shows the default Drop Eligibility Indicator for untagged frames.
QoS class:

MGS3600-24F/XGS3600-26F/XGS3600-28F
page for this port controls the mapping of classified (PCP, DEI) to (QoS class, DP level) values.
Enable or Disable tag classification.
(PCP,DEI) to (QoS class, DP level) Mapping
QoS Ingress Port Tag Classification
7-97
on the QoS Ingress
page.
U
SER
' G
S UIDE