Acl Status - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.3.4 ACL Status

Use the ACL Status sub-menu to get an overview of the status of all ACEs used across the device.
To show the ACL status:
1. Click Configuration >
2. Select the part of the device that uses this ACL from the ACL User drop-down box.
Parameter description
User:

This field shows the ACE user.
Ingress Port:

This field shows the ingress port that matches this ACE.
Frame Type:

This field shows which Ethernet frame type matches this ACE. Possible values are:
Any: The ACE matches any frame type.

EType: The ACE matches Ethernet frames that are not IP or ARP frames.

ARP: The ACE matches ARP/RARP frames.

IPv4: The ACE matches IPv4 packets.

IPv4/ICMP: The ACE matches ICMP packets.

IPv4/UDP: The ACE matches UDP packets.

IPv4/TCP: The ACE matches TCP packets.

IPv4/Other n: The ACE matches IPv4 packets with protocol number n in the IP header.

Action:

This field shows whether the ACE is configured to
Rate Limiter:

This field shows how the rate limiter ID is configured in the ACE.
MGS3600-24F/XGS3600-26F/XGS3600-28F
ACL > ACL Status.
Permit
All means any port.
or Deny forwarding matching traffic.
Disabled means the action is disabled.
7-21 U ' G
SER S UIDE