Port Configuration - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.6.2 Port Configuration

Use the Port Configuration
To configure MRSTP ports:
1. Click Configuration >
2. Configure the parameters for one or more ports.
3. Click Save.
Parameter description
Port:

This field shows the port number for this row.
Instance

Use this drop-down box to configure whether this port participates in MRSTP or not. Choose
Path Cost

Use this drop-down box to configure the cost incurred by this port when MRSTP calculates the lowest path cost through this port to the root
bridge. Choose Auto
to manually assign a value from 1 to 200000000.
Priority:

Use this drop-down box to configure the priority of this port when MRSTP must decide between identical path costs.
Admin Edge:

Use this drop-down box to configure the state of the operEdge flag when the port is initialized. If the operEdge flag is true, the port transi-
tions directly to the forwarding state because the port is at the edge of the network and an edge device (non-STP device) is attached to this
port.
Admin P2P:

Use this drop-down box to configure whether the port is connected to point-to-point or shared media. Choose
media, choose Forced False
to-point media.
MGS3600-24F/XGS3600-26F/XGS3600-28F
sub-menu to configure the MRSTP port parameters.
MRSTP > Port Configuration.
to automatically assign an 802.1D recommended patch cost or choose
for shared media or choose Auto to let the switch decide. Transition to the forwarding state is faster for point-
7-44
None or an MRSTP instance number.
Specific and then complete the adjacent field
Forced True for point-to-point
U ' G
SER S UIDE