ZyXEL Communications MGS3600-24F User Manual page 199

F M
RONT ATTER
Coordinates Location
Latitude and Longitude:

Use these fields and drop-down boxes to configure the number of degrees
meridian this switch is located. Latitude must be between 0 and 90 degrees and longitude must be between 0 and 180 degrees with a max-
imum of 4 digits.
Altitude:

Use these fields and drop-down boxes to configure the altitude of the switch from -32767 to 32767 with a maximum of 4 digits. Choose
Meters to configure a distance in meters from the vertical datum or choose
side the building or the level of the main entrance.
Map Datum:

Use this drop-down box to configure one of the following Map Datums.
WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327, Prime Meridian Name: Greenwich.

NAD83/NAVD88:

the North American Vertical Datum of 1988 (NAVD88). Use this datum pair when referencing locations on land, not near tidal water.
NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian Name: Greenwich; The associated vertical datum is

Mean Lower Low Water (MLLW). Use this datum pair when referencing locations on water/sea/ocean.
Civic Address Location
Use these fields to configure IETF Geopriv Civic Address based Location Configuration Information (Civic Address LCI).
Country code:

The two-letter ISO 3166 country code in capital ASCII letters - Example: DK, DE or US.
State:

National subdivisions (state, canton, region, province, prefecture).
County:

County, parish, gun (Japan), district.
City:

City, township, shi (Japan) - Example: Copenhagen.
MGS3600-24F/XGS3600-26F/XGS3600-28F
North American Datum 1983, CRS Code 4269, Prime Meridian Name: Greenwich; The associated vertical datum is
North or South of the equator and
Floors to configure a distance in floors from ground level out-
7-66
East or West of the prime
U ' G
SER S UIDE