F
M
RONT
ATTER
2.2.3 Mounting the Switch on a Rack
1.
Position a mounting bracket (that is already attached to the switch) on one side of the rack, lining up the two screw holes on the bracket with
the screw holes on the side of the rack.
Figure 2-3. MGS3600-24F/XGS3600-26F/XGS3600-28F Mounting the Switch on a Rack
2.
Using a #2 Phillips screwdriver, install the M5 flat head screws through the mounting bracket holes into the rack.
3.
Repeat steps 1 and 2 to attach the second mounting bracket on the other side of the rack.
MGS3600-24F/XGS3600-26F/XGS3600-28F
2-6
U
'
G
SER
S
UIDE