F
M
RONT
ATTER
6.7 SNMP
Use the
SNMP
sub-menu to configure the Simple Network Management Protocol on the device.
SNMP governs communication between SNMP managers and agents. Any SNMP manager can manage devices that have an SNMP agent and a
correctly installed Management Information Base (MIB). Most communication is initiated by the SNMP Manager; traps are the only communication
initiated by agents.
6.7.1 System
To enable or disable SNMP:
1. Click
System
>
SNMP
2. Specify the SNMP parameters.
3. Click Apply.
Parameter description
SNMP State:
Use these radio buttons to enable (default) or disable the SNMP agent.
Engine ID:
Use this field to configure the SNMPv3 Engine ID. The Engine ID is a hexadecimal number between 5 and 32 octets long. The fifth octet
must not be 00. All users are cleared if the Engine ID is changed.
MGS3600-24F/XGS3600-26F/XGS3600-28F
> System.
6-23
U
'
G
SER
S
UIDE