Port Dscp - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.14.6 Port DSCP

Use the Port DSCP sub-menu to configure on a port-by-port basis how the DSCP field is changed on ingress and egress packets.
To configure Port DSCP:
1. Click Configuration >
2. Configure the parameters
3. Click Save.
Parameter description
Port:

This shows the port number for this row.
Ingress Translate:

Check this check box to enable incoming translation (change the DSCP field on ingress packets).
Ingress Classify:

Use this drop-down box to configure how incoming packets are classified into flows.
Disable: Don't classify any packets.

DSCP=0: Classify packets that have a DSCP of 0.

Selected: Classify packets with one of a set of selected DSCPs. These selected DSCPs are those whose

box is checked in the
All: Classify all packets.

Egress:

Use this drop-down box to configure how packets leaving the switch have their DSCP fields changed.
Disable: Don't rewrite any packets.

Enable: Rewrite the DSCP field without re-mapping it.

Remap: Rewrite the DSCP with the re-mapped DSCP.

MGS3600-24F/XGS3600-26F/XGS3600-28F
QoS > Port DSCP.
DSCP Translation page.
7-106
Ingress Classify check
U ' G
SER S UIDE