ZyXEL Communications MGS3600-24F User Manual page 224

F M
RONT ATTER
Timer Values:

Use this field to configure the following timers:
Join Timer: The default value for Join timer is 200ms.

Leave Timer: The range of values for Leave Time is 600-1000ms. The default value for Leave Timer is 600ms.

Leave All Timer:

Application:

Use this drop-down box to configure the GARP or MRP application to
Attribute Type:

Use this drop-down box to configure the types of attributes distributed by GARP/MRP to VLAN.
GARP/MRP Applicant:

Use this drop-down box to configure the Applicant state machine behavior for GARP/MRP on this port to:
normal-participant:

non-participant: In this mode the Applicant state machine will not participate in the protocol operation.

MGS3600-24F/XGS3600-26F/XGS3600-28F
The default value for Leave All Timer is 10000ms
In this default mode the Applicant state machine will operate normally in GARP/MRP protocol exchanges.
GVRP or MVRP.
7-91 U ' G
SER S UIDE