F
M
RONT
ATTER
2.1 Free Standing Installation
This chapter shows you how to install and connect the switch.
1.
Make sure the switch is clean and dry.
2.
Set the switch on a smooth, level surface strong enough to support the weight of the switch and the connected cables. Make sure there is a
power outlet nearby.
3.
Make sure there is enough clearance around the switch to allow air circulation and the attachment of cables and the power cord.
4.
Remove the adhesive backing from the rubber feet.
5.
Attach the rubber feet to each corner on the bottom of the switch. These rubber feet help protect the switch from shock or vibration and
ensure space between devices when stacking.
Note:
Do NOT block the ventilation holes. Leave space between devices when stacking.
MGS3600-24F/XGS3600-26F/XGS3600-28F
Figure 2-1. MGS3600-24F/XGS3600-26F/XGS3600-28F Attaching Rubber Feet
2-2
U
'
G
SER
S
UIDE