F
M
RONT
ATTER
9.2 Firmware
Use the
Firmware
sub-menu to upgrade the firmware or revert to the previous version of firmware. The switch can be enhanced with more fea-
tures by installing firmware upgrades.
9.2.1 Firmware Upgrade
Use the
Firmware Upgrade
To upgrade the firmware,
1. Click
Maintenance
>
2. Browse to the new firmware file.
3. Click
Upload
to upload the firmware file to the switch.
4. Follow the onscreen prompts to complete the firmware upgrade.
Note:
This page facilitates an update of the firmware controlling the stack. switch. Uploading software will update all managed switches in the
stack to the location of a software image and click. After the software image is uploaded, a page announces that the firmware update is ini-
tiated. After about a minute, the firmware is updated and all managed switches in the stack restart. the switch restarts.
WARNING:
While the firmware is being updated, Web access appears to be defunct. The front LED flashes Green/Off with a frequency of 10 Hz while
the firmware update is in progress. Do not restart or power off the device at this time or the switch may fail to function afterwards.
MGS3600-24F/XGS3600-26F/XGS3600-28F
sub-menu to upgrade the firmware.
Firmware
>
Firmware
Upgrade.
9-3
U
'
G
SER
S
UIDE