Vlan Configuration - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.7.2 VLAN Configuration

Use the VLAN Configuration
To configure how IGMP and MLD snooping operates over VLANs:
1. Click Configuration >
2. Check the Snooping Enabled
3. Click Save.
4. Configure the remaining parameters.
5. Click Save.
Parameter description
VLAN ID:

This field shows the VLAN ID for this row.
Snooping Enabled:

Use this check box to enable or disable snooping on this VLAN. A maximum of 32 VLANs can be enabled.
IGMP Querier or MLD Querier:

Use this check box to enable or disable IGMP or MLD queries to be forwarded to this VLAN.
Compatibility:

Use this drop-down box to configure which version of IGMP or MLD is allowed on this VLAN. Choose IGMP-Auto,
IGMPv2 or Forced IGMPv3
Rv:

Use this field to configure the Robustness Variable to a value from 1 to 255 (default 2). The Robustness Variable allows tuning of the
expected packet loss on a network.
QI:

Use this field to configure the Query Interval to a value from 1 to 31744 (default 125) seconds. The Query Interval is the time between Gen-
eral Queries sent by the querier.
MGS3600-24F/XGS3600-26F/XGS3600-28F
sub-menu to configure how IGMP and MLD snooping operate over each VLAN.
IGMP Snooping or MLD Snooping
check box to allow the remaining parameters to be configured.
for IGMP or choose MLD-Auto,
> VLAN Configuration.
Forced MLDv1, Forced MLDv2
7-50
Forced IGMPv1,
or MLD-Auto for MLD.
Forced
U ' G
SER S UIDE