Sampler - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.15.2 Sampler

Use the Sampler sub-menu to configure how the sFlow agent samples traffic on a port-by-port basis.
To configure the sampler:
1. Click Configuration >
2. Click on the port number to edit the sFlow sampler parameters.
3. Configure the parameters.
4. Click Save.
Parameter description
sFlow Port:

This field shows the port that is being configured.
sFlow Instance:

This field shows the sFlow instance for this port.
Sampler Type:

Use this drop-down box to configure what is sampled on this port. Choose
TX to sample traffic sent or
Sampling Rate:

Use this field to configure the switch to sample one in this number of frames. This can be from
Max Hdr Size:

Use this field to configure the amount of the frame header (default 128 bytes) that is sampled. This must be from
Polling Interval:

Use this field to configure how often counters are sampled. This can be from
MGS3600-24F/XGS3600-26F/XGS3600-28F
sFlow Agent > sampler.
ALL to sample both sent and received traffic.
None (default) to disable sampling,
0 (disabled) to
7-120
RX to sample traffic received,
0 (disabled) to 4095.
14 to 200
3600 seconds.
bytes.
U ' G
SER S UIDE