Lldp Med Neighbors - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.9.4 LLDP MED Neighbors

Use the LLDP MED Neighbors
To show LLDP-MED neighbors click
Parameter description
Port:

This field shows the port number on which the LLDP frame was received.
Device Type:

LLDP-MED Devices are comprised of two primary Device Types: Network Connectivity Devices and Endpoint Devices.
LLDP-MED Network Connectivity Devices, as defined in TIA-1057, provide access to the IEEE 802 based LAN infrastructure for LLDP-
MED Endpoint Devices. An LLDP-MED Network Connectivity Device is a LAN access device based on any of the following technologies:
a. LAN Switch/Router
b. IEEE 802.1 Bridge
c. IEEE 802.3 Repeater (included for historical reasons)
d. IEEE 802.11 Wireless Access Point
e. Any device that supports the IEEE 802.1AB and MED extensions defined by TIA-1057 and can relay IEEE 802 frames via any method
LLDP-MED Endpoint Device Definition:

LLDP-MED Endpoint Devices, as defined in TIA-1057, are located at the IEEE 802 LAN network edge, and participate in IP communica-
tion service using the LLDP-MED framework.
Within the LLDP-MED Endpoint Device category, the LLDP-MED scheme is broken into further Endpoint Device Classes, as defined in
the following.
Each LLDP-MED Endpoint Device Class is defined to build upon the capabilities defined for the previous Endpoint Device Class. For-
example will any LLDP-MED Endpoint Device claiming compliance as a Media Endpoint (Class II) also support all aspects of TIA-1057
applicable to Generic Endpoints (Class I), and any LLDP-MED Endpoint Device claiming compliance as a Communication Device (Class
III) will also support all aspects of TIA-1057 applicable to both Media Endpoints (Class II) and Generic Endpoints (Class I).
MGS3600-24F/XGS3600-26F/XGS3600-28F
sub-menu to show an overview of all LLDP-MED neighbors.
Configuration > LLDP > LLDP-MED Neighbors.
7-71 U ' G
SER S UIDE